digital phone system image

 

   Setting Time
Battery Back-Up Message on Hold System Protection Setting Time Wiring Help
Unified Telecom
Small Systems
Iwatsu ECS
Avaya IP Office
Telecor VS1
WiFi
Leasing
Support
National Accounts
Contact Us 		 
Iwatsu Enterprise Communications Server (ECS)

To adjust the clock settings on ECS systems running software releases prior to 2.10, perform the following steps from an attendant station:

1) Press the Speaker button SPKR

2) Wait for the dial tone

3) Press the Feature button FEAT then dial 6 + 4

4) Dial the time in military time H H : M M

5) Wait for a confirmation tone

6) Press the Speaker button SPKR

Adix VS and Adix
From the Operator DSS when idle:
Press [ICM] + [FEAT] + [6] + [4]
Enter the time [HH MM] using the 24 hour military clock
Press [SPKR]

Vodavi Starplus STS

Attendant Setting Time and Date
System Time/Date must be set by the first programmed Attendant via admin programming or using feature code 692.


To set using the feature code:

  1. Dial [692] on the dial pad. A confirmation tone will sound.
  2. Enter date and time as follows: YYMMDDHHMM
  3. Press the ON/OFF button to OFF to update the display.

 


YY = Year (00-99)
MM = Month (01-12) MM = Minute (00-59)
DD = Day (01-31)

HH = Hour (00-23)

MM = Minute (00-59)

 

When the correct number of digits are entered, a confirmation tone will sound.

Telecor VS1

Dial 7800 from any phone and follow voice prompts.

 

Also for Picazo and Dash

 
 

 

 
 Back Home Up Next